Top Servo To Usb Converter Board

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

USB A Male to 12V Car Cigarette Lighter Socket Female Converter Cable 2-Pack

  • USB car cigarette lighter socket adapter: USB Input: 5V 2A, Cigarette Lighter Socket Output: 12V 8W Max.
  • USB Port Power Converter: convert power from USB port to 12V car cigarette lighter socket.
  • Convenience: Easy to power on your car electronic equipments by extra power.
  • Plug and play: Easy to carry when travel. The part of PCB board is moulded by PVC which can extend its life.
  • Fit for Driving recorder, electronic dog, car charger and other automotive electronic equipment.
Check Stock

Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

for Mitsubishi 915B441001 WD-82838,WD-65738,WD-82738,WD-60738,WD-60638,WD-65838,WD-73638 DLP TV Replacement Lamp by Molgoc

  • USB Port Power Converter: Convert power from USB port to 12V car cigarette lighter socket, connect to some 12V 8W car equipment..
  • Multiple Intelligent Safety Protection: boost module comes with over-voltage, short circuit and other multiple protection. Omni-directional protection of power supply equipment and electrical equipment safety..
  • Small And Portable: The appearance is simple and beautiful, and the volume is small and convenient for travel. Low calorific value and long working time. The part of the PCB board is made of PVC molding, which is not easy to be damaged..
  • Easy To Use: USB Port to 12V Car Cigarette Lighter Socket Converter, easy to use, plug and play, easily power your car electronics with additional power source like power bank..
  • Quality Service: If the product has any quality problems or you have any questions about this product, you can contact us at any time, We will answer you within 24 hours. we will try our best to solve your problem in time,please rest assured to buy..
Check Stock

2PCS USB A Male to 12V Car Cigarette Lighter Socket Female Converter Cable 16.2IN, for Car Cigarette Lighters DVR Dash Camera

  • USB Port Power Converter: Convert power from USB port to 12V car cigarette lighter socket, connect to some 12V 8W car equipment..
  • Multiple Intelligent Safety Protection: boost module comes with over-voltage, short circuit and other multiple protection. Omni-directional protection of power supply equipment and electrical equipment safety..
  • Small And Portable: The appearance is simple and beautiful, and the volume is small and convenient for travel. Low calorific value and long working time. The part of the PCB board is made of PVC molding, which is not easy to be damaged..
  • Easy To Use: USB Port to 12V Car Cigarette Lighter Socket Converter, easy to use, plug and play, easily power your car electronics with additional power source like power bank..
  • Quality Service: If the product has any quality problems or you have any questions about this product, you can contact us at any time, We will answer you within 24 hours. we will try our best to solve your problem in time,please rest assured to buy..
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

The Road to Unfreedom: Russia, Europe, America

  • ...uropean Plug Adapter: The type c plug adapter compatible in most European countries such as Austria, Belarus, Belgium, Croatia, Denmark, Finland, France, Germany, Greece, Hungary, Portugal, Poland, Netherlands, Spain, Turkey, Italy.
  • More country list can be checked in description.
  • 7 in 1 European Adapter: This power converter US to Europe combines 4 AC outlets and 3 USB charging ports, allows you to charge 7 electronics simultaneously.
  • Larger space makes power adapter Europe easier to fit all electric equipment without blocking.
  • European Travel Plug Adapter USB C: Dual USB A ports can charge up to 2.4A, and the USB C port can charge up to 3A.
  • Ideal for cell phone, tablet, power bank, laptop, earphone, etc.
  • NOTE: All the USB ports output: 5V/3A, 15W max.
  • Not a Voltage Converter: The adapters for Europe is not a voltage converter.
  • Please make sure your devices especially your hair dryer, straightener, hair curler, electric toothbrush or electric razor need to support 100V to 250V Dual Voltage.
  • If your device is 110V or 125V only, you will need a voltage converter.
  • International Plug Adapter: This outlet converter US to Europe is compact and lightweight to save your suitcase space for traveling.
Check Stock

USB A Male to 12V Car Cigarette Lighter Socket Female Converter Cable (8W Max)

  • Please check your device power before buying, Because this USB to 12v cigarette lighter socket output 12v 8w Max. (It's not support some high power electric device,such as tire inflator, air compressor, car cleaner, car refrigerator and more).
  • USB Port Power Converter: convert power from USB port to 12V car cigarette lighter socket.
  • Convenience: Easy to power on your car electronic equipments by extra power(such like a power bank).
  • Plug and play: Easy to carry when travel. The part of PCB board is moulded by PVC which can extend its life.
  • Fit for Driving recorder, electronic dog, car charger and other automotive electronic equipment.
Check Stock