Top Supply Voltage

MP3020D 0-30V 0-20A Digital LED Regulated Variable Lab DC Bench Power Supply Adjustable Forced Air Cooling with Power Line Pack Accessories Manual Fit Inverter Industry

  • Adjustable DC Power Supply:✅0-30 volts and 0-10 ampere output.
  • Decimal point automatic carry & LED 4 digits display of voltage function displays. Display accuracy: 0.01V and 0.001A. Clearer visible readout for the voltage and current value, extremely durable, and easily visible even in low-light usage..
  • Constant Voltage and Current:✅Automatic conversion between C.C and C.V modes, which can stably output voltage or current.
  • The independent adjustment knobs allow for a bit by bit adjustment of voltage and current data. The conversion between constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact & 5V/2A USB Interface:✅This power supply features the latest flame-retardant material housing for lightweight and high performance while maximizing impact resistance for safety. 5V / 2A USB port provides power to charge your phone or the device you want to repair without worrying about running out of power..
  • Multiple Protection Functions:✅Intelligent temperature adjustment function with an integrated thermal sensor can effectively reduce the temperature during operation, effectively reduce noise. The power supply is durable and compact. Multiple Protections include boundary current protection, thermal protection,....
Check Stock

DC Power Supply Variable, Bench Power Supply with Output Switch, Short Circuit Alarm, Adjustable Switching Regulated Power Supply 30V 10A with 4-Digits LED Power Display, USB Quick-Charge Interface

  • 【Highly Accurate Encoder Adjustment】 Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs..
  • 【Output Switch Control】 In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency..
  • 【Automatic Power Calculation】 The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment..
  • 【Short Circuit Alarm】 When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage pr....
Check Stock

20/24 4/6/8 Pin Computer PC Power Supply Tester with LCD Display and Buzzer for ATX, ITX, BTX, PCI E, SATA, HDD

  • ...en your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know..
  • WITH LED DISPLAY: We have developed a portable computer power tester for the power supply market that can judge the quality of the power supply. It has LCD display intuitive and accurate display voltage (+/ 0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and more test functions. It is your best choice and reliable helper to quickly detect PC power..
  • EASY TO USE: This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in LCD screen to quickly detect the performance of computer power supply..
  • PRACTICAL & CONVENIENCE: Small and practical power tester. Now the number of power output groups is increasing. As long as one of them has problem, the hardware of the computer system may work abnormally or even burn out. To measure whether the output voltage output of the power supply is stable, the player usually uses a multimeter. But for the average user is still a little troublesome..
Check Stock

Kiss of Dragon Tattoo Power Supply - 1650mAh Wireless Tattoo Battery for Rotary Tattoo Machine Pen,DC Interface

  • Material: The Kiss of Dragon tattoo power supply is made of aluminum alloy frame, small in size,75mm(Length) X 32mm(Width) X 60mm(Height), light in weight (63g/2.22oz), easy to carry, you can do tattoo work outdoors..
  • Big Capacity: The wireless tattoo power supply has a built-in 3x 550mAh lithium battery with a working voltage of 3.7V and an output current of 1A. Fast charging can reach full state within 1.5-2 hours. The environmental pattern power supply can run continuously for 4 hours at 8V Voltage, and the output is stable..
  • Adjustable Voltage: Tattoo machine power supply have 5 adjusted voltage levels, 5V, 6.5V, 8V, 9.5V, 11V 5 lights, it is more convenient to quickly adjust the output voltage, different voltage level to fitted all tattoo style need. It is suitable for most brands of tattoo pen machines, liner and shader machines..
  • Portable Design: Tattoo battery pack wireless operation allows rotary tattoo machines and tattoo pens to work without clip cords. The durable casing won't scratch or dent as easily..
  • Packing List: 1 wireless tattoo power supply, 1 USB tattoo power cord..
Check Stock

1800w Mining Power Supply 8 GPU 1800W Modular PSU for Bitcoin Ethereum Miner 110V (100~264v) AC to DC Full 150A PSU GPU BTC ETH Graphics Video Card 2U

  • 【Professional Supply】This power supply is rated 1800 watts. single fan multi-channel power supply supports 8 high-end graphics cards.(Input Voltage of 110V.
  • 【Energy saving】The conversion rate is as high as 95% or more (while the conversion rate of passive PFC is often below 70%), which can reduce electricity bills. More energy saving! More environmentally friendly.
  • 【PFC】This power supply adopts an active PFC circuit, Compared with passive PFC, its input voltage can be from 100V to 264V, while ordinary passive PFC power supplies cannot work when the voltage is lower than 180V.
  • 【Over Voltage Protection】Perfect function for protecting Miners, when circut is malfunction or power supply has higher inside temperature, it will shut off automatically to protect antminer.
  • 【NOTICE 】Please note that because the power supply is running at high power, a high-speed cooling fan is equipped to effectively dissipate heat. The sound will be a bit loud during the power supply operation. Please don't worry, this is normal..
Check Stock

Furrion AC/DC Distribution Panel - Wall Mount with AC & DC Power Distribution for Both 30 Amp and 50 Amp Power Converters - FDP12WA-BL

  • 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
Check Stock

Comidox 1Pcs 20/24 Pin LCD Computer PC Power Supply Tester for ATX BTX ITX TFX SATA with Buzzer Automatic Alarm

  • The LCD power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply..
  • The LCD displays various parameters such as output voltage and PG. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash..
  • It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG, and also measure the output wire P4/P6/P8/SATA/IDE, external DIE/SATA/P6/P8 is the light Displayed, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage..
  • It has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and many test functions. It is the best choice for quickly detecting PC power..
  • Support 20Pin, 24Pin ATX interface / SATA interface / 4Pin, 8Pin interface / PCI-E graphics card 6Pin interface / floppy drive interface / ATE hard disk interface..
Check Stock

Mini Tattoo Power Supply Set,New Star Tattoo Mini Motor Black Tattoo Machine Power Supply with Tattoo Clip Cord and Stainless Steel Foot Pedal for Permanent Makeup Tattoo Supply Accessory

  • 1.HIQH QUALITY:Tattoo min power supply is made by aluminum alloy,smooth and light body,beautiful appearance and excellent workmanship,tattoo foot....
  • 2.EASY USE:Tattoo foot switch and tattoo clip cord are easily connect tattoo power supply.Easy installation,tattoo power supply set works for all....
  • 3.ADJUSTABLE VOLTAGE:Standard voltage setting,accurate voltage regulation.Voltage below 18V can be adjusted freely. Fully-adjustable output with dual....
  • 4.PORTABLE:Tattoo machine kit is portable and light-weight,it's easy and convenient to carry for anywhere operation.The power supply can endure....
  • 5.PACKAGE INCLUDES:Tattoo power supply set including 1 piece new generation of mini tattoo power supply,1 piece tattoo clip cord,1 piece mini tattoo....
Check Stock

IDEC GT3A-3AF20 Electromechanical General Purpose Timer

  • Price For: Each Time Min: 0.05s Time Max: 180h Power Consumption: 14.4VA Reset Time: 60ms Supply Voltage Max: 240VAC Supply Voltage Min: 100VAC Supply Voltage Range AC: 100V to 240V Switch Function: SPDT.
Check Stock

IDEC RTE-P2AF20 Electromechanical Multifunction Timer

  • Price For: Each Time Min: 0.1s Time Max: 600h Power Consumption: 11.6VA Reset Time: 100ms Mounting Type: 11-pin Supply Voltage: 240VAC Supply Voltage Max: 240VAC Supply Voltage Min: 100VAC Type: Multi-Mode.
Check Stock

Tattoo Power Supply-BIOMASER TP-5 Touch Screen Intelligent Digital LCD Makeup Dual Tattoo Power Supplies Set with Cord Upgraded Version of HP-2 Tattoo Power Supply Machine Kit

  • ...ttoo power supply. It includes a universal mount, dont need to assemble yourself again, lighter weight and easy to carry..
  • PERFORMANCEOur BIOMASER tattoo power supply machine box set use standard adapter connect to power supply through DC/19" socket fully digital microprocessor control, precision regulated set point voltage 3-18VDC. Easy to use and fit for any tattoo machine pen..
  • STRONG PROTECT SYSTERMThis Tattoo Power Supply use a strong protect system, when you use too high voltage or too slow voltage then it will start working to protect the power supply. Also you need to use the right voltage and reconnect all the parts to start again..
  • LINER/SHADER PRESETS with MEMORY MODESMomentary(conventional) or Maintained (push on push off) foot switch modes. Easy one button toggle, Nonvolatile memory (holds time and presets even when power is removed).
  • 100% SATISFACTION GUARANTEED12 MONTH WARRANTY for Tattoo Power Supply Machine, Three months warranty for adapter, Power supply cord and other accessories. NO RISK OF PURCHASE! For any problem about this TATTOO POWER SUPPLY, please contact us via AMAZON, we will do our best to solve all your problems! Add to Cart Now!.
Check Stock