Top Trailer Brake Kit 5

Rockwell American 3,500 lb Idler Trailer Axle Running Gear (Idler Axle W/Hubs, Bearings, Lugs & Nuts, Springs, U-Bolt Kit, Hanger kit. (61\ Hubface, 46\ Spring Center)

  • Rockwell American Tandem 3,500 lb Trailer Axles (1 Electric Brake Axle, 1 Idler Axle) - Running Gear Set (7,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Tandem Axle Kit comes with: (1) 3,500 lb Electric Brake Axle and (1) Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check Stock

CURT 51457 Quick Plug Electric Trailer Brake Controller Wiring Harness, Select Ram 1500, Classic, 2500, 3500, 4500, 5500

  • EASY TO INSTALL. No cutting or splicing required! This vehicle-specific wiring harness allows fast, easy, plug-and-play trailer brake controller installation. NOTE: Software in vehicle must be updated by dealership to accept an aftermarket controller.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes.
  • VEHICLE-SPECIFIC. This electrical brake controller wiring fits select model years of the Ram 1500, 1500 Classic, 2500, 3500, 4500 and 5500 (without factory integrated brake controller - ITBC).
  • VERSATILE USE. This trailer brake controller wiring kit is compatible with any CURT trailer brake controllers equipped with a quick plug connector -- proportional, inertia and time delay. It also features a 24-inch length for flexible positioning.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

High Powered 8KW 72V Electric Car E-Car Brushless Gearless Conversion Kit New

  • Are you tired of your electric trailer brakes not working? Here is the SOLUTION!!.
  • This kit fits on Dexter & Lippert 10,000 lb General Duty Axles commonly found on Kauffman, Big Tex, PJ, Bwise, LoadMax, and other heavy duty trailers. NOTE: Will not work with Rockwell or AL-KO axles!!.
  • The kit includes (2) left-hand & (2) right-hand hydraulic brake assemblies, (1) Hydraulic brake actuator, and (1) tandem axle brake line kit. PLEASE SPECIFY IF YOU HAVE SPRING OR TORSION AXLES OTHERWISE OUR BRAKE LINE KIT OF CHOICE WILL BE INCLUDED!.
  • Brake size is 12-1/4" x 3-3/8" with a 7-bolt mounting plate.These components have passed the CSA Standard CAN3-D313-M85 For Trailer Running Gear. ISO/TS 16949:2002 certified..
  • Brake actuator is a Genuine Dexter product part # K71-650-00. 1,000 PSI..
Check Stock

Kuryakyn 2595 Motorcycle Accessory: Plug & Play Trailer Wiring with Relay Harness for 2014-19 Harley-Davidson FLH/FLT Motorcycles with 5-Wire Trailer , Black

  • Allows you to safely and effectively apply the load from your trailer lighting the the battery.
  • Eliminates overloading stock lighting or accessory circuits.
  • Relay harness utilized inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.
  • Kit provides standard 5-wire output (run, brake, left turn, right turn, ground).
  • Does not include receptable kit due to varies style required by trailer manufacturer.
  • Includes (1) relay module 5 wire, (1) 5 pin trailer plug harness, (1) inline blade style fuse holder, and (1) hardware kit.
  • Suggested for installation (not included): wire stripper/cutter, wire crimpers, #2 phillips screwdriver, socket and ratchet set, in-lbs (Nm) torque wrench.
  • Compatible with 5-wire trailers on Harley-Davidson models: '14-'19 Electra Glides, Road Glides, Street Glides (excludes '14-'15 FLHTKSE, '15 FLTRUSE), and Road King Special.
Check Stock

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

Curt 13068 55336 Class 3 Trailer Hitch and Wiring Kit for Honda Odyssey

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock

TEKONSHA 90885 / Tekonsha Prodigy P2 Electronic Brake Control f/1-4 Axle Trailers - Proportional

  • Ram 1500 2500 3500 4500 5500 Electronic Integrated Trailer Brake Controller Module with Switch. Part# 82215040AC, 82215040AB, 82215040, 68105206AC, 68105206AB.
  • Replacement for 2016-2021 Dodge Ram 1500.
  • Warranty for 12 Months! Adopt high-end chips to provide fast braking with positive response, and the performance is at least 50% higher than other similar parts..
  • Integrated Trailer Brake Control Module allows driver to automatically or manually activate the electronic brakes on properly equipped trailers for greater stopping power on downhill grades. The controller and status display are mounted in the dashboard to the left of the steering wheel, and the included control lever can activate the trailer brakes independent of the truck's brakes. Drivers can customize the amount of brake force the trailer uses, depending on load requirements..
  • It is necessary to check if the vehicle has both trailer brake module connectors. These connectors are located under left side of the steering column. Both connecters are 4 pin connectors. If both connecters are not present the ITBM kit cannot be added to the vehicle..
Check Stock

5.2k Heavy Duty Tandem Axle TK Trailer kit - 10,400 lb Capacity (89\ Hubface - 74\ Spring Center(6'4 Frame), Add Spare (15\ 225/75 R15 8 ply Radial TWA))

  • Rockwell American Tandem 7,000 lb Electric Brake Trailer Axles - Running Gear Set (14,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Kit Includes: (2) 7,000 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (Assembled) (2 Year Warranty), (2) Round U-Bolt Kits, (1) Tandem Hanger Kit for Double Eye Springs, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Double Walled Insulated Mug.
  • Replaces Dexter & Al-Ko Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for More Trailer Parts.
Check Stock

CURT Class 3 Trailer Hitch Tow Package with 2in Ball for 2007-2012 GMC Acadia

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock

Nilight - TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Trailer Tail Lights 2 Inch Round Red LED Side Marker Lights w/Grommet Plugs Wire connectors, 2 Years Warranty

  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights.
  • Red brake lights and flashing orange Direction Indicator lights control by the separate circuit. Red - Brake, Green Right Turn Signal, white - Ground, Yellow - left turn signal and Black - License plate/Running.
  • 4x3.5inch good tail light kit can use on any trailer.
  • 24ft cable to light with a Standard 7 Pin Plug, fit for flat Pin Adapter, then 8ft cable to go across to the the next light. Some trucks, cars, and SUVs are 4-wire systems, this trailer light is not fit for them, please confirm that this trailer light is suitable for the plug socket on your vehicle before ordering..
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in a....
Check Stock

OCPTY Trailer Hub Brake Drum 10 x 2-1/4 Wheel Bearing Kits For 1-1/16 Outer 1-3/8 Inner Tapered Spindle Grease Seal For 3,500 lb. Axles 5 Bolt Lug

  • Black 10 x 2-1/4 trailer brake drum kit. Bolt pattern is 5 on 4.5.
  • Races are pre-installed Fits 3,500 lb. axles, Rated to 1,750 lbs. each or 3,500 lbs. For the pair.
  • This hub bearing is meticulously manufactured and easy-installation designed, which can bring you a convenient and fantastic using experience.
  • 1 pack Trailer Brake Drum Hub kit For 1 year after-sale warranty.
  • Complete assembly with hub, bearings, seal, cap, Lug Nuts.
Check Stock

CURT 99313 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Buick Enclave Chevy Traverse GMC Acadia

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock