Top Bevel Gear Mating Shaft

Boston Gear G486Y-G Bevel Gear, 4:1 Ratio, 0.313\ Bore, 32 Pitch, 64 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • ★[OPTIMAL PERFORMANCE]: EXAUTOPONE premium Stainless Steel Bevel Gear Set made of premium stainless steel material improves gear mesh, and with delicate workmanship, which is durable and hard, and long service life..
  • ★[GREAT APPLICATION]:EXAUTOPONE premium Stainless Steel Bevel Gear Set provides over drive for the front axle, helping to pull car climb easily. And it can guarantee to meet the original equipment..
  • ★[FITMENT]:Compatible with AR44 axles, including a 8T bevel gear and a 30T bevel gear..
  • ★[HIGH QUALITY]:EXAUTOPONE premium Stainless Steel Bevel Gear Set is 100% brand new aftermarket unit built to meet OEM specifications. easy to install and remove, ideal replacement for the old or broken one. Factory price with higher cost-effective..
  • ★[PACKAGE & WARRANTY]:Package Includes 1 Pcs X 30T/8T Stainless Steel Bevel Gear Set . Any question just contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

CHENGYIDA 40-Pack Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY

  • Model Number: Aperture: 2MM (with 2 mm shaft fit).
Check Stock

EUDAX 82 pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Toy Motor Car Robot Various Gear Axle Belt Bushings

  • The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy toy cars/robots/motors..
  • Axle length of 30mm, 50mm, 70mm, 100mm, shaft diameter is 2mm, 2pcs / kind, for a total of 8 Pcs.
  • Five wheel wheels: outer diameter 30mm, inner hole 2mmfor a total of 4 Pcs.
  • The characteristics of gear: 36MM yellow 2mm hole belt wheel, rack, four-wheel drive, 28 tooth 2mm hole Fan teeth and 30-100mm gear axle, five wheel wheel diameter 30mm!Multi-uses, you can use it to fix the toys,Great for diy science and small production, product design and mechanical model..
  • Most gear is 2mm aperture (tight or loose), in addition to one 81.5A spindle hole is 1.5mm, there are 2 crown is 2.5mm, there are 1 crown gear C303A is 3mm, one 15 teeth 2.3mm hole and 3.17mm hole..
Check Stock

Husqvarna 535 LK Detachable Gas String Trimmer

  • Toolless coupler separates shaft for easy transport, and storage, and click on attachments for easy tool change.
  • When the machine is turned off, the stop switch automatically returns to the start position for easier starting.
  • The engine and starter have been designed so the machine starts quickly with minimum effort.
  • Air purge removes air from carburetor and fuel system for easy starting.
  • The bevel gear is designed with high torque and the cutting equipment is parallel to the ground for the best cutting performance.
  • Stop switch automatically resets to the ON position for easier starting.
Check Stock

6HP 4 Stroke Outboard Motor Boat Engine Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System

  • 【6HP 4 STROKE OUTBOARD MOTOR】Air Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for....
  • 【MAIN PARAMETER 】Model：single cylinder、air cool、four stroke、hand pull.
  • 【PRODUCT SPECIFICATIONS】Outboard model: spline drivehard shaft、spiral bevel gear.
  • Steering: vertical axis, counterclockwise.
  • 【HIGH PERFORMANCE】Start-In-Gear protection/clutch feature prohibits prop rotation while idling. Easy pull off engine cover with push button latch....
  • 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the....
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

4 Stroke 6HP Outboard Motor Fishing Boat Engine with Air Cooling System 4 Stroke - 6HP - Style 2

  • Transmission mode: spline transmission, hard shaft, spiral bevel gear Installation method.
  • fixed support frame combination or clamping bracket....
  • Whole propeller configuration, counterclockwise: three-blade or two-blade anti-wrapping..
  • Exhaust muffler method: muffler is discharged directly outside the machine..
  • Premium service: If you encounter any problems, please contact us in time, we will deal with it within 24 hours..
Check Stock

Husqvarna 970452001 329L 28cc Gasoline Straight Shaft LINE Trimmer W/Trim Head

  • Efficient 27.6cc 2-cycle trimmer is a versatile tool for regular homeowner or part-time professional use.
  • Comes with a heavy-duty T35 trimmer head from Husqvarna.
  • Robust unit delivers excellent power while the extended straight shaft greatly improves the unit’s reach and durability.
  • Engine features a SmartStart system to ensure the unit starts up quickly and with minimal effort.
  • The intuitive controls, including choke and purge, are easy to understand.
  • Convenient stop switch automatically resets to the ‘on’ position to simplify startups.
  • High-torque bevel gear is positioned parallel to the ground for efficient cutting performance.
  • Backed by a 2-year limited warranty for homeowner use.
Check Stock

FoxAlien CNC Router Machine 4040-XE, 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • 1.Bronze bevel gear generally has better corrosion resistance, abrasion resistance, casting and excellent mechanical properties..
  • 2.This not only increases durability and longevity but even reduces noise over time..
  • 3.The straight type bronze gear is designed to used with power feed milling machine as long as the direction of the tooth is same..
  • 4.This compact bevel gear is easy to install with some small or large shim..
  • 5.The gears include bronze gear and iron gear are milled by pricing milling skill for high precision and accuracy..
Check Stock