Top Steel Crankshaft

Gas Engine Pulley Adapter Kit, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

  • Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
  • Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
  • The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
  • Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
  • Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check Stock

1 to 1-1/8 inch 1/4 Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

  • This steel shaft sleeve adapts a crankshaft from 1” to 1-1/8” diameter. It comes with 1/4“ stepkey..
  • Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Part’s specification:Sleeve inside diameter 1”,Sleeve outside diameter 1-1/8”.
  • Sleeve length is about 3”,Sleeve Keyway slot 1/4”,Step Key Length is about 2”.
  • The sleeve and step key are designed to slip fit on your 1” diameter crankshaft with 1/4” keyway and enlarge it to 1-1/8 diameter with 1/4”....
Check Stock

Engine Crankshaft Turning Socket Tool, Aluminum, 1/2" Drive, Compatible with Chevy BBC Big Block 366 396 402 427 454

  • FITMENT - This BBC Crankshaft Socket Fits Chevy Cars with The Big Block Chevy Engines as below: 366 (6.0 L) 1960-1990,396 (6.5 L) 1965-1972, 402 (6.6 L) 1970-1972,427 (7.0 L) 1962-1963,454 (7.4 L) 1970-1976.
  • BENEFITS - Crankshaft Turning Sockets are a necessity for engine building. This socket slips onto the crank and will make turning your crank a snap,besides non- damaging aluminum tool will rotate the crankshaft in the correct way.
  • FEATURES - 1/2 Breaker Bar or Drive Ratchet for Rotating the Engine, fits 1. 610 ID crankshaft port with 3/16" keyway.
  • QUALITY - Corrosion-Resistant & Machined From 6061 Billet Aluminum.
  • INCLUDES - (1)BBC Crankshaft Socket Tool.
Check Stock

303-1510 6.7L Power Stroke Front Crankshaft Seal Remover Alt ST-152 Fit for 2011-2019 Ford Super Duty F-250, F-350, F-450 and F-550, 2016-2019 Ford Super Duty F-650 F-750

  • Fitment: 6.7L Power Stroke Diesel Front Crankshaft Seal Remover fits for 2011-2019 Ford Super Duty F-250, F-350, F-450 and F-550, 2016-2019 Ford Super Duty F-650 F-750.
  • High Quality: Machined from heavy duty steel with excellent mechanical and physical properties, this removal tool is good in corrosion resistance and durability.
  • Application: Used for the removal of front crankshaft seal without damaging the seal, it credibly prevents the seal from leaking.
  • Features: Simple to use, impossible to mess up, and well built. Recommend to anyone in the service industry (Directly replace part numbers 303-1510).
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Front Crankshaft Seal Remover, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

E-cowlboy Crankshaft Positioning Tool for Ford 1993-newer 4.2L 4.6L 5.4L 6.8L Engines Crankshaft Holding Tool Timing Chain Installation Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219

  • ...4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines. Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219. Each part is manufactured to OEM specifications and testing..
  • Perfect Design — These engines are not Free Wheel engines, please Do Not rotate the crankshaft and/or camshaft when removing the timing chain and installing the cylinder heads. If it has "Jumped Timing", it will cause damage to the Valves and/or Pistons, requiring removal of the cylinder heads..
  • Easier Work — Must have tool for timing chain installation and adjustment! Easily install this tool over crankshaft and engine front cover alignment dowel. Align the crankshaft Woodruff key with the keyway on tool. It will position the crankshaft at top-dead-center (TDC) to correct the timing chain installation..
  • Superior Quality — Premium grade CNC machined heavy duty solid steel with black powder coated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation. High precision and hardness to provide a much longer service life..
Check Stock

80Pcs Woodruff Key Assortment, Stainless Steel Woodruff Key Set, Half Moon Gear Shaft Drive Flywheel Key Pulley Crank Fasteners, Various Size for Fasteners Mechanical Industry, with Storage Box

  • Increase torque and horsepower within the operating range.
Check Stock

LicBund 5/8" to 3/4 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Pulley Bore Reducer Bushing Sheave & Key Predator

  • Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
  • Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
  • The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
  • Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
  • Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check Stock

INEEDUP 13401-28030 Automotive Engine Crankshaft Fit for for Toyota 2AZ 2.4L Camary Scion Highlander Solara Rav4 Crankshaft

  • FITMENT - Fit for CRANKSHAFT for TOYOTA 2AZ-FE.Engine Code:2AZ-FE 16V DOHC 2.4 LTR VVT-i PETROL.Compatible Models:For TOYOTA PREVIA, For CAMRY, For ALPHARD, For SOLARA, For RAV4, For IPSUM, For AVENSIS, For ESTIMA & For SCION 2001-08..
  • FEATURES - Common faults in crankshaft include journal wear, cracks, ablation, bending, twisting, and fracture etc. Our high quality crankshaft can convert the linear motion of a piston in rotary motion effectively to improve engine performance noticeably. This crankshaft is a good choice to solve these issues for you..
  • INSTALL READY - Complete new crankshaft, perfect fit and no modification is needed. Ready to install for your vehicle..
  • REMINDING - Kindly please refer to the fitment below to make sure the Brand Type and Year can fit your model..
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

  • ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
  • Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
  • ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
  • ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
  • ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

Engine Crankshaft - 4-Stroke Engine Crankshaft 110cc for ATVs Dirt Bikes Pocket Bikes Scooter Accessory Simple installation

  • Fits GM LS1, LS2, LS3, LS6, LS7, L92 To: Pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E.
  • Package Includes: 1 x LS Crankshaft Spacer, 6 x Crankshaft Spacer Bolts..
  • Note : 1. WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft.
  • 2. Required when used with automatic transmission built before 1997， Ensures Proper Clearance Between Crankshaft and Converte.
  • 1 Year Unlimited-mileage Quality Guarantee.
Check Stock